Reduce your water bills and your impact on the environment by collecting rainwater from your own roof. This water normally flows wastefully down gutters and drains.
Rainwater can be used for watering gardens, flushing toilets, and washing clothes.
Apart from doing your bit for the community and the ecology, when you have tank water on-tap you can use water in more flexible ways. You can even fill up the kidsâ€™ super-soaker guns and let them play without feeling guilty.
You can collect rainwater from your existing gutters and downpipes, and from your house, garage, carport and shed.
Just one warning â€“ Donâ€™t use your rainwater tank for drinking water unless it has been treated by an approved water sanitation system. Water can harbor some nasty organisms and substances so donâ€™t take chances with your familyâ€™s health.
- Tape measure
- Spirit level
- Cordless drill / driver and bits
- Holesaws or jigsaw
- Hand saw or power saw
- Pop rivet gun
- Caulking gun
- Claw hammer
- 75mm paint brush, rags
- Step or extension ladder
Check with your local council and water authority before buying and installing a rainwater tank. Some tanks may require building approval.
You should hire a licensed/registered plumber to make connections, especially to items connected to your main water supply, such as toilets and washing machines.
While some authorities are mandating water tanks for new homes, the rest of us ponder where we can fit one to our existing home. The standard old-style cylindrical concrete or steel tanks are still a cost-effective solution for homes with plenty of land around them, but what if youâ€™re a little tight for space? There are now some innovative water tanks that will slip into unused space around your home.
Great locations for them include: under a deck or patio; in a side passage; under an elevated house; behind a garage; or under a new swimming pool.
Collapsible water tanks (large water bags in a frame), are very easy to fit into tight spaces under houses or decks. They are assembled in place so there are no handling or access problems like there are with moving large awkward tanks in confined spaces. These collapsible tanks can also be used as temporary stormwater retention systems â€“ helping to take the pressure of the local drainage system until the storm-front has passed.
Some swimming pool manufacturers now offer pools with an integrated water storage tank under the shallow end, or in the same excavation. So if youâ€™re considering a new pool, nowâ€™s the time to look at water storage too (because pools require regular top-ups). If youâ€™ve had enough of looking after an old pool, rather than ripping it out or filling it in, have a lid made for it (say a large deck) that converts your pool into a water tank. An average in-ground pool holds 50,000 litres, making an old pool a very large water tank indeed.
With water storage size is everything. When the downpours finally arrive a large tank will store more before the excess runs off to drains, streams and the sea. That means you have more to use until the next rain.
Each tank has slightly different requirements for installation and you should carefully read the instructions to make sure you donâ€™t void the warranty, but these steps apply to most tanks.
STEP 1: POSITION THE TANK AND PREPARE THE BASE
Carefully select the site for your tank. It should be close to a downpipe, accessible, not blocking access, and unobtrusive.
Water tanks are heavy when full â€“ about the same as a small family car when full â€“ so a solid, flat base is needed. They may be set on a bed of sand, concrete or a platform made from timber or steel. Over time a sand base may erode, and tree roots may invade and damage the tank bottom, so concrete and platform bases may be a better long-term option.
Platform bases allow the tank to be lifted high enough to fill buckets and watering cans direct from the outlet, and the extra height can make quite a difference to pressure at the hose nozzle.
The tank supplier will specify the minimum requirements for the base â€“ donâ€™t take shortcuts.
When the base is ready you will need help to get the tank into position. They are not that heavy, but they certainly are awkward. Some modular tanks may be connected in â€œbanksâ€ to provide large capacity in a compact space. Check the connection methods now before you make any other plumbing connections to the main tank. Make sure that the tankâ€™s outlet connections are accessible.
STEP 2: MAKE THE RAINWATER CONNECTIONS
Some tanks may require you to cut out the inlet and/or overflow holes in the positions that best suit your site. These may be cut with a holesaw, jigsaw, or keyhole saw, and should be cut accurately to avoid leaks.
Carefully check the manufacturerâ€™s instructions to make sure that the tank inlet and outlet fittings are installed correctly, because some parts will need to be permanently installed with a silicone sealer, while others must remain removable for cleaning and access.
Remove your existing downpipe from the elbow and redirect it to the inlet screen of your tank. Do this by making new pipework with a combination of pipe and elbows of 45Âº and 90Âº.
Itâ€™s a good idea to fit a water cleaning / filtering device at this point â€“ such as a â€œfirst flush diverterâ€. These devices divert the initial water from rain away from your tank, carrying away any dirt thatâ€™s accumulated on the roof and gutters. After that, it diverts clean water into your tank.
Install all of the parts without glue initially to make sure all of the parts fit properly, and that you can secure the pipe to a wall or the tank with brackets. Remember that water weighs 1kg per litre so when the pipes are full thereâ€™s quite a lot of weight in them. Mark them with pencil to make sure theyâ€™ll go back together exactly as before.
After you have installed the outlet connections (in case you have to move the tank) disassemble the inlet pipe connections and reassemble using PVC pipe primer and adhesive.
STEP 3: MAKE THE OUTLET CONNECTIONS
The outlet holes are blanked-off, so youâ€™ll have to drill out the one you want to use. Carefully drill out the blank with a 25mm spade bit â€“ making sure that you donâ€™t damage the thread where the tap or hose fitting will screw into the tank.
Reduce the likelihood of leaks by wrapping Teflon tape around the thread prior to screwing it in.
If youâ€™re using a pump, install a flexible hose between the pump and the tap. This will absorb vibration and shock from the pump, reducing the likelihood of parts cracking and leaking.
Gravity can provide enough pressure if you can position your tank high enough, but youâ€™ll probably need a pressure pump. These are reasonably priced (around $300) and they make it possible to use a hose or irrigation system to distribute your tank water with practically the same performance as mains water.
Some tank manufacturers supply tanks with an internal pump. These are quiet and take up no extra space.
If you want to use a pump for fire fighting youâ€™ll need a petrol or diesel powered pump because power is often cut off in a bushfire emergency.
Discuss your needs with the supplier before selecting a pump thatâ€™s right for you.
Water tanks are fairly low-maintenance installations, but you will need to pay regular attention to gutters to make sure they are clean and clear. If not, the tank water will be tainted and rainwater may be wasted if gutters block. Clear and clean any strainers and filters regularly.
Changing a worn tap washer on a tank is a problem because you canâ€™t really shut off the water pressure while you do the job. For this reason itâ€™s wise to install a ball-valve on tanks instead of a standard tap with a â€œjumper valveâ€. If the tank is ever near-empty change the tap washer then â€“ even if itâ€™s not leaking. You might even consider flushing out any sludge thatâ€™s accumulated on the tank bottom while itâ€™s empty. Washers only cost a dollar or two, and tanks may not empty out for years. If you must change a leaking washer with a full tank you can do it with the water gushing, because the pressure isnâ€™t that high (usually). Although some water will be wasted, the worn washer was wasting it anyway.